Laddawn.com : Clean room bags & tubing

I. Technical specifications

1. New Catalog Code or Existing? New
   
   1. If new, where should it be placed in Level 2 menu?
      1. Under poly bags: "Clean Room Class 100" - between can liners and food service (Layflat/gusseted nested underneath)
      2. Under reclosables: "Clean Room Zip Top Class 200" - between bubble and food service
      3. Under tubing & sleeves: "Clean Room Class 100" - between black conductive tubing and layflat sleeves (Layflat Tubing & Layflat Sleeves nested underneath)
2. Do we have Stock Items in this Category?  No  If Yes:
   1. Can these be sampled? n/a
   2. What is the maximum Sample quantity? n/a
   3. What is the sample Unit of Measure? (ie, bags, feet) n/a
      
      
3. Widget Level 2 – Dimensions:
   1. Width ranges: 
      1. Layflat/Gusseted: 3"-40"
      2. Zip Top: 3"-24"
      3. Tubing: 3"-72"
   2. Depth enabled? Y  If Yes:
      1. Depth Ranges: Layflat/Gusseted: 2"-22"; Depth cannot exceed half the width, minus 2"
   3. Length ranges: 
      1. Layflat/Gusseted: 3"-80"
      2. Zip Top: 3"-36"
      3. Tubing: no max
   4. Gauge ranges: 3-6 mil for all
   5. Full gauge: Y
      1. Non-Printed – Default Value: Full gauge
      2. Non-Printed – Changeable? No
      3. Printed – Default Value: n/a
      4. Printed – Changeable? n/a
      5. Stock Items are:  Full Gauge or Nominal n/a
      6. Exceptions (ie, <=1mil must be FG): n/a
         
         
4. Widget  Level 3:
   1. Materials Menu:
      1. Enabled? N
      2. What is the default? LDPE
      3. If enabled, which options are allowed for Materials and Additives? n/a
   2. Color Menu:
      1. Enabled? N
      2. What is the default? Clear
      3. If enabled, which color/opacities are allowed? n/a
   3. Registered Printing Allowed? ___N___  If YES:
      1. Width Ranges: n/a
      2. Length Ranges:n/a
      3. Gauge Ranges:n/a
      4. Material Restrictions?
      5. Color/Opacity Restrictions?
   4. Is Venting Allowed? ¬___N_____   If YES:
      1. Which Vent Hole Types are allowed?n/a
      2. Which Placement Options are allowed?n/a
      3. Which Alignment Options are allowed?n/a
      4. Nbr of Holes Min/Max Range (include calculation, if any)n/a
      5. Inches From Side (include calculation, if any)n/a
      6. Inches from Bottom (include calculation, if any)n/a
      7. Inches Between Holes (include calculation, if any)n/a
   5. Packaging Menu:
      1. What is the default? (Cases or Rolls, Boxed) cases for all, except tubing = rolls, boxed
      2. Disabled after the default (so no changes can be made)? Y
         
         
5. Minimum Quantity calculation:
   1. For lay flat=round 100 / (((width*length)*(gauge))/15) to the nearest decimal;
   2. For gusseted =round 100 / ((((width+gusset)*length)*(gauge))/15) to the nearest decimal; 
   3. For zip top=round 100 / (((width*(length+1))*(gauge))/15) to the nearest decimal; 
   4. For tubing=round 100 / ((width*gauge)*0.8)) to the nearest decimal; 
6. Count:
   
   1. Default Count Calculation 
      1. For lay flat= if((round(20/(((width*length)*gauge)/15,0))=0,200,(round(20/(((width*length)*gauge))/15,0)*1000); 
      2. For gusseted= if((round(20/(((width+gusset)*length)*(gauge))/15,0))=0,200,(round(20/((((width+gusset)*length)*gauge))/15,0)*1000);
      3. For Zip Top=if((round(20/(((width*(length+1)*gauge)/15,0))=0,200,(round(20/(((width*(length+1))*gauge))/15,0*1000); 
      4. For Tubing=if((round(30/(((width*gauge*0.8)=0,200,(round(30/(((width*gauge*0.8))*1000)
   2. Count Range (for validation)
      1. High range(Lay Flat) =if((round(42/(((width*length)*gauge)/15,0))=0,200,(round(42/(((width*length)*gauge)/15,0)*1000)
      2. Low range(Lay Flat) =if((round(7/(((width*length)*gauge)/15,0))=0,200,(round(7/((width)*length)*gauge)/15,0)*1000)
      3. High range(Gusseted) =if((round(42/((((width+gusset)*length)*gauge)/15,0))=0,200,(round(42/((((width+gusset)*length)*gauge)/15,0)*1000)
      4. Low range(Gusseted) =if((round(7/((((width+gusset)*length)*gauge)/15,0))=0,200,(round(7/(((width+gusset)*length)*gauge)/15,0)*1000)
      5. High range(Zip Top) =if((round(42/(((width*(length+1))*gauge)/15,0))=0,200,(round(42/(((width*(length+1))*gauge)/15,0)*1000)
      6. Low range(Zip Top) =if((round(7/(((width*(length+1))*gauge)/15,0))=0,200,(round(7/((width)*(length+1))*gauge)/15,0)*1000)
      7. High Range (Tubing) =if((round(40/(((width*gauge*0.8)=0,200,(round(40/(((width*gauge*0.8))*1000)
      8. Low Range (Tubing) =if((round(20/(((width*gauge*0.8)=0,200,(round(20/(((width*gauge*0.8))*1000)
   3. Range Multiples?  (ie, in multiples of 50)
      
      
7. Pricing Unit of Measure (Thousands, Rolls, Cases) M for everything except tubing is Rolls
   
   
8. Customer Pricing/Vendor Costing Model – provide calculation or attach Excel Spreadsheet:
   
   
9. Quantity/Price Breaks: N
   
   1. Standard Quantity Break calculation (if any): N
   2. Are Custom Breaks Allowed? N
      
      
10. Case or Roll Weight calculation (including packaging) – if on a roll, we need the core weight as well as the box weight. If in a case, we need the box weight:
    1. Lay Flat=((Width*Length)*Gauge)/15*(Count/1000)+0.5
    2. Gusseted=(((Width+gusset)*Length)/15*Gauge)*(Count/1000)+0.5
    3. Zip Top=((Width*(Length+1))*Gauge)/15*(Count/1000)+0.5
    4. Tubing=((Width*Gauge)*0.8)*(Count/1000)+0.5
11. Freight Calculation:- New Freight Model
    1. Is Freight from Spreadsheet? Y
    2. If not from spreadsheet, what is the ‘from’ warehouse & carrier name?n/a
    3. Do we allow shipments to Canada? Y
       
       
12. Is Freight always included in the price (disable freight option)? Y
    
    
13. Lead Time Days:
    1. Domestic: 21 days for all except 28 days for zip tops
    2. Import:n/a
    3. Registered Printed:n/a
       
       
14. Should an Import result be shown? No
    
    
15. Overrun Percentage: +/-10%
    
    
16. Construction:
    1. Bottom Seal or Side Weld: bottom seal for all bags except zip tops are side weld
       
       
17. Specifications/Descriptions area:
    1. Image to Display:
       1. For Lay Flat: Z:\Sales-Mktg Tools\Laddawn-Images-for-web\bag drawings for web\D-layflat
       2. For Gusseted: Z:\Sales-Mktg Tools\Laddawn-Images-for-web\bag drawings for web\D-gusset
       3. For Zip Top: Z:\Sales-Mktg Tools\Laddawn-Images-for-web\bag drawings for web\D-zip-top
       4. For Tubing:Z:\Sales-Mktg Tools\Laddawn-Images-for-web\bag drawings for web\D-tubing-layflat
    2. Description Text: This product is manufactured and packaged in a controlled environment to ensure it is free from contaminates. Contains no additives. Made with a proprietary blend of 100% virgin low density polyethylene that is devoid of any processing aids. Provided in cases. (For Tubing: rolls, boxed). Has been tested to meet performance parameters as outlined in ISO 14644-1 for an ISO Class 5 Clean Room at 0.5 microns.
    3. Specifications Text:
       1. Material: Low-Density Polyethylene
       2. Construction: Bottom Seal (Except Zip Top is Sideweld)
       3. Shelf Life: 5-10 years, when properly stored.
       4. Storage: Store as temperatures less than 120 degrees F. Avoid storage in direct sunlight.
       5. Regulatory Status: This product complies with California Proposition 65 and all applicable CONEG heavy metal restrictions.
18. Additional abbreviated text in internal item description? (ie, TAMPER EVIDENT, VAC POUCH) Clean Room Bags; Clean Room Zip Tops; Clean Room Tubing 
19. Advanced Search Keywords (for quick search entry at top of widget):
    1. Keywords:  class 100, class 200, ISO class 5, clean bag, certified, ISO 14644-1, double poly lined, no contaminants, cleanliness, cross contamination, clean packaging, sterile, contamination
       
    2. Type of Search: custom only
       1. We source custom and offer stock - choosing category via widget menu and incomplete dimensions, or via search box - produces all stock matches
       2. We only source custom - choosing category via widget menu or search box places cursor in first dimension field with tool tip about need for dimensions.
          
          
20. YMAC instructions: n/a
    
    
21. Special Instructions: 

II. User interface changes

III. QA requirements

IV. Change management and rollout planning

Creative brief?

Internal training and preparation? 

Coordinated with marketing campaign?