Laddawn.com : Garment Bags

I. Technical specifications

1. New Catalog Code or Existing? Existing Category
   
   1. If new, where should it be placed in Level 2 menu?
      
      
2. Do we have Stock Items in this Category? Yes   If Yes:
   1. Can these be sampled? Yes, stock can be sampled but no custom samples of custom size garment bags are available.
   2. What is the maximum Sample quantity? 5
   3. What is the sample Unit of Measure? (ie, bags, feet) Bags
      
      
3. Widget Level 2 – Dimensions:
   1. Width ranges: 20"-22"  width cell is "width" in the spreadsheet (no " " around cell name)
   2. Depth enabled? Yes  If Yes:
      1. Depth Ranges: 3"-7"  depth cell is "depth" in the spreadsheet
   3. Length ranges: 28"-72" length cell is "length" in the spreadsheet
   4. Gauge ranges: .6-1 mil   gauge cell is "gauge" in the spreadsheet
   5. Full gauge: Yes
      1. Non-Printed – Default Value: Use current default statement
      2. Non-Printed – Changeable? No
      3. Printed – Default Value: Use current default statement
      4. Printed – Changeable? No
      5. Stock Items are:  Full Gauge 
      6. Exceptions (ie, <=1mil must be FG):  none
         We can pass the requested quantity into cell "quantity"
4. Widget  Level 3:
   1. Materials Menu:
      1. Enabled? No
      2. What is the default? Low-Density Polyethylene
      3. If enabled, which options are allowed for Materials and Additives? 
   2. Color Menu:
      1. Enabled? No 
      2. What is the default? Clear
      3. If enabled, which color/opacities are allowed? 
   3. Registered Printing Allowed? __No; see UI section below for canned message.____  If YES:
      1. Width Ranges:
      2. Length Ranges:
      3. Gauge Ranges:
      4. Material Restrictions?
      5. Color/Opacity Restrictions?
   4. Is Venting Allowed? ¬___No___   If YES:
      1. Which Vent Hole Types are allowed?
      2. Which Placement Options are allowed?
      3. Which Alignment Options are allowed?
      4. Nbr of Holes Min/Max Range (include calculation, if any)
      5. Inches From Side (include calculation, if any)
      6. Inches from Bottom (include calculation, if any)
      7. Inches Between Holes (include calculation, if any)
   5. Packaging Menu:
      1. What is the default? (Cases or Rolls, Boxed)
      2. Disabled after the default (so no changes can be made)? Yes
         
         
5. Minimum Quantity calculation:
   If we can pull this directly from the spreadsheet it is located in cell named minimum  if not the calculation is round up to the nearest whole number 500 divided by yield then multiplied by 1000 then divided by roll count. yield is width + depth then multiplied by length then multiplied by gauge then divided by 15. yield can be pulled from the spreadsheet from the cell named "yield"
6. Count:
   
   1. Default Count Calculation =(((4*3.14159)+(1.5*3.14159))/2)*(5.5/((gauge/1000)*4))/length
   2. Count Range (for validation) None. Default only and lock
   3. Range Multiples?  (ie, in multiples of 50)
7. Customer Pricing/Vendor Costing Model – provide calculation or attach Excel Spreadsheet:
   Z:Drive/pricingforms  dev & trn folders
8. Quantity/Price Breaks:
   
   1. Standard Quantity Break calculation (if any): 2 X minimum, 3 X minimum, 4 X minimum. We could pull the quantity breaks from the spreadsheet in cells firstqtybreak, secondqtybreak, thirdqtybreak.  We can pull the price per roll for each break from cells firstpricebreak, secondpricebreak, thirdpricebreak.  We can pull the total price from firstbreaktotalprice, secondbreaktotalprice, thirdbreaktotalprice.
   2. Are Custom Breaks Allowed? Yes
      
      
9. Case or Roll Weight calculation (including packaging) – if on a roll, we need the core weight as well as the box weight. If in a case, we need the box weight:
   Z:\Pricingforms\Dev  also in  Z:\Pricingforms\Trn
10. Freight Calculation:
    1. Is Freight from Spreadsheet? Yes
    2. If not from spreadsheet, what is the ‘from’ warehouse & carrier name?
    3. Do we allow shipments to Canada? Yes
       
       
11. Is Freight always included in the price (disable freight option)? Yes
    
    
12. Lead Time Days:
    1. Domestic: 28 days
    2. Import:
    3. Registered Printed:
       
       
13. Should an Import result be shown? No
    
    
14. Overrun Percentage: +/- 10%
    
    
15. Construction: Bottomseal
    1. Bottom Seal or Side Weld
       
       
16. Image to display in Specifications area: Use stock images
    
    
17. Additional abbreviated text in internal item description? (ie, TAMPER EVIDENT, VAC POUCH) Garment Bags
    
    
18. Advanced Search Keywords (for quick search entry at top of widget):
    1. Keywords: No additions. Use the current keywords for garment bags.
    2. Type of Search, i or ii? Answer: i 
       1. We source custom and offer stock - choosing category via widget menu and incomplete dimensions, or via search box - produces all stock matches. 
       2. We only source custom - choosing category via widget menu or search box places cursor in first dimensionf field with tooltip about need for dimensions.
          
          
19. YMAC instructions: Show closest two stock sizes in same category when no direct match. No other YMACs
    
    
20. Special Instructions: None

II. User interface changes

When the user clicks "Add Printing" display this message:

III. QA requirements

IV. Change managment and rollout planning

Marketing info 

Creative brief?

Internal training and preparation? 

Coordinated with marketing campaign?