Laddawn.com : High Density Bags

Cell Reference Names;

Width

Length

Gusset

Gauge

Quantity

Printed

Metallocene

FilmColor

Opacity

OnRolls

Count

DomesticPrice

DomesticTotalPrice

DomesticCost

DomesticFreight

DomFirstBreakQTY

DomFirstBreakPrice

DomFirstBreakTotalPrice

DomSecondBreakQTY

DomSecondBreakPrice

DomSecondBreakTotalPrice

DomThirdBreakQTY

DomThirdBreakPrice

DomThirdBreakTotalPrice

ImportPrice

ImportTotalPrice

ImportCost

ImportFirstBreakQTY

ImportFirstBreakPrice

ImportFirstBreakTotalPrice

ImportSeocondBreakQTY

ImportSecondBreakPrice

ImportSecondBreakTotalPrice

ImportThirdBreakQTY

ImportThirdBreakPrice

ImportThirdBreakTotalPrice

I. Technical specifications

1. New Catalog Code or Existing? New: High Density Gusseted and Layflat
   
   1. If new, where should it be placed in Level 2 menu? "High Density (HD)" to be nested between Garment and Lip & Tape; expand to show Layflat and Gusseted (similar to the way polypro works).
      
      
2. Do we have Stock Items in this Category? No  If Yes:
   1. Can these be sampled? No
   2. What is the maximum Sample quantity? N/A
   3. What is the sample Unit of Measure? (ie, bags, feet) N/A
      
      
3. Widget Level 2 – Dimensions:
   1. Width ranges: 9"-45".
   2. Depth enabled?  Yes If Yes:
      1. Depth Ranges: 4"-22" (depth can't be more than half of the width)
   3. Length ranges: 10-60"
   4. Gauge ranges:if width is greater than 33" then 18 mics - 76 mics. Otherwise 10 mic - 76 mic.  If gusseted max gauge is 25.4 mics.
   5. Full gauge: No
      1. Non-Printed – Default Value:
      2. Non-Printed – Changeable?
      3. Printed – Default Value:
      4. Printed – Changeable?
      5. Stock Items are:  Full Gauge or Nominal 
      6. Exceptions (ie, <=1mil must be FG): 
         
         
4. Widget  Level 3:
   1. Materials Menu:
      1. Enabled? Yes.
      2. What is the default? High Density
      3. If enabled, which options are allowed for Materials and Additives? None
   2. Color Menu:
      1. Enabled? Yes
      2. What is the default? Clear Film.

      3. If enabled, which color/opacities are allowed? red color, red tint, white color, white tint medium blue color, medium blue tint, leaf green color, leaf green tint, orange color, orange tint, black color, black tint.

   3. Registered Printing Allowed? No  If YES:
      1. Width Ranges:
      2. Length Ranges:
      3. Gauge Ranges:  
      4. Material Restrictions?
      5. Color/Opacity Restrictions?
   4. Is Venting Allowed? ¬__YES__   If YES:
      1. Which Vent Hole Types are allowed? normal, small
      2. Which Placement Options are allowed? All
      3. Which Alignment Options are allowed? All
      4. Nbr of Holes Min/Max Range (include calculation, if any) Same as in -house rules
      5. Inches From Side (include calculation, if any) Same as in-house
      6. Inches from Bottom (include calculation, if any) Same as in-house
      7. Inches Between Holes (include calculation, if any) Same as in-house
   5. Packaging Menu:
      1. What is the default? (Cases or Rolls, Boxed) Cases, Rolls Boxed
      2. Disabled after the default (so no changes can be made)? No
         
         
5. Minimum Quantity calculation:
   =round 500 / ((((width+gusset)*length)*(gauge/25.4))/15) to the nearest whole number.
6. Count:
   
   1. Default Count Calculation = if((round(20/((((width+gusset)*length)*(gauge/25.4))/15,0))=0,.200,(round(20/((((width+gusset)*length)*(gauge/25.4))/15,0)*1000)
   2. Count Range (for validation)
      1. High range =if((round(42/((((width+gusset)*length)*(gauge/25.4))/15,0))=0,200,(round(42/((((width+gusset)*length)*(gauge/25.4))/15,0)*1000)
      2. Low range =if((round(7/((((width+gusset)*length)*(gauge/25.4))/15,0))=0,200,(round(7/((((width+gusset)*length)*(gauge/25.4))/15,0)*1000)
   3. Range Multiples?  (ie, in multiples of 50)
7. Customer Pricing/Vendor Costing Model – provide calculation or attach Excel Spreadsheet: HDPE Pricing Model
8. Quantity/Price Breaks:
   
   1. Standard Quantity Break calculation (if any): 2X & 4X the minimum quantity.
   2. Are Custom Breaks Allowed? Yes
      
      
9. Case or Roll Weight calculation (including packaging) – if on a roll, we need the core weight as well as the box weight. If in a case, we need the box weight: =(((Width+Gusset)*Length)*(Gauge/25.4))*(Count/1000)+1
   
   
10. Freight Calculation:
    1. Is Freight from Spreadsheet? Yes
    2. If not from spreadsheet, what is the ‘from’ warehouse & carrier name?
    3. Do we allow shipments to Canada? Yes
       
       
11. Is Freight always included in the price (disable freight option)? Yes
    
    
12. Lead Time Days:
    1. Domestic: 30
    2. Import: 95
    3. Registered Printed: N/A
       
       
13. Should an Import result be shown? Yes
    
    
14. Overrun Percentage:  10%
    
    
15. Construction:
    1. Bottom Seal
       
       
16. Image to display in Specifications area For HDPE Layflats show Z:\Sales-Mktg Tools\Laddawn-Images-for-web\bag drawings for web\D-layflat.  If on rolls boxed show Z:\Sales-Mktg Tools\Laddawn-Images-for-web\bag drawings for web\D-Gusset-BOR
17. Additional abbreviated text in internal item description? (ie, TAMPER EVIDENT, VAC POUCH) HDPE Bags
    
    
18. Advanced Search Keywords (for quick search entry at top of widget):
    1. Keywords: 
    2. Type of Search:
       1. We source custom and offer stock - choosing category via widget menu and incomplete dimensions, or via search box - produces all stock matches
       2. We only source custom - choosing category via widget menu or search box places cursor in first dimensionf field with tooltip about need for dimensions.
          
          
19. YMAC instructions: None
    
    
20. Special Instructions:

II. User interface changes

For users to quote by selecting HD categories via category menu:

For users to quote by selecting regular LF/GU via menu  then HD via materials menu:

III. QA requirements

IV. Change managment and rollout planning

Creative brief?

Internal training and preparation? 

Coordinated with marketing campaign?