Laddawn.com : Black Conductive

I. Technical specifications

1. New Catalog Code or Existing?
   
   1. If new, where should it be placed in Level 2 menu?
      Existing category under static control products
2. Do we have Stock Items in this Category?    If Yes:
   1. Can these be sampled? Stock can be sampled, but no samples of black conductive marketplace custom quotes.
   2. What is the maximum Sample quantity? One
   3. What is the sample Unit of Measure? (ie, bags, feet) M Bags
      
      
3. Widget Level 2 – Dimensions:
   1. Width ranges: 2-60"
   2. Depth enabled? No If Yes:
      1. Depth Ranges:
   3. Length ranges: 4-60"
   4. Gauge ranges: 2-10 mil
   5. Full gauge: No, nominal gauge for custom
      1. Non-Printed – Default Value: "Add Printing" current default message is good. As is the message that appears when "Add Printing" is clicked
      2. Non-Printed – Changeable? No
      3. Printed – Default Value:
      4. Printed – Changeable?
      5. Stock Items are:  Full Gauge
      6. Exceptions (ie, <=1mil must be FG): No exceptions
         
         
4. Widget  Level 3:
   1. Materials Menu:
      1. Enabled? No
      2. What is the default? Black Conductive (Same as stock)
      3. If enabled, which options are allowed for Materials and Additives? 
   2. Color Menu:
      1. Enabled? No
      2. What is the default? Black, Opaque 
      3. If enabled, which color/opacities are allowed? 
   3. Registered Printing Allowed? __No_  If YES:
      1. Width Ranges:
      2. Length Ranges:
      3. Gauge Ranges:
      4. Material Restrictions?
      5. Color/Opacity Restrictions?
   4. Is Venting Allowed? ¬___No___   If YES:
      1. Which Vent Hole Types are allowed?
      2. Which Placement Options are allowed?
      3. Which Alignment Options are allowed?
      4. Nbr of Holes Min/Max Range (include calculation, if any)
      5. Inches From Side (include calculation, if any)
      6. Inches from Bottom (include calculation, if any)
      7. Inches Between Holes (include calculation, if any)
   5. Packaging Menu:
      1. What is the default? (Cases or Rolls, Boxed) Cases
      2. Disabled after the default (so no changes can be made)? Yes
         
         
5. Minimum Quantity calculation:
   Width(*Length+.5)*Gauge/13.2= Film Weight (FW)             

   =if(round(250/FW,1)<1,1,round(250/FW,0)) this means that if the minimum run of 250/FW rounded to the nearest tenth is less than 1M, then make it 1M, otherwise round to the nearest whole number 250/FW

6. Count:
   
   1. Default Count Calculation\
      1. If rounding (25/FW)*1000 to the nearest 250 equals 0 then 100. Otherwise round (25/FW)*1000 to the nearest 250.
   2. Count Range (for validation)
      1. Minimum
         1. If rounding (16/FW)*1000 to the nearest 250 equals 0 then 100. Otherwise round (16/FW)*1000 to the nearest 250.
      2. Maximum
         1. If rounding (60/FW)*1000 to the nearest 100 equals 0 then 50. Otherwise round (60/FW)*1000 to the nearest 100.
7. Customer Pricing/Vendor Costing Model – provide calculation or attach Excel Spreadsheet:
   
   
   Note: When David and the developer are actively working on this project, the most current spreadsheet will reside in the designated shared drive (Z:\PricingForms\Dev). Since there's a high probability they'll make changes to the spreadsheet once this is being worked on, let's remember to reference that spreadsheet and not the one attached here (or replace the link with a link to the live file - I think that can be done?) -SP, 3/14/18
   
   
8. Quantity/Price Breaks:
   
   1. Standard Quantity Break calculation (if any): None
   2. Are Custom Breaks Allowed? Yes
      
      
9. Case or Roll Weight calculation (including packaging) – if on a roll, we need the core weight as well as the box weight. If in a case, we need the box weight:
   FW*(CASE PACK/1000)+1
10. Freight Calculation:
    1. Is Freight from Spreadsheet? Yes
    2. If not from spreadsheet, what is the ‘from’ warehouse & carrier name? 01 is the warehouse. Freight carrier not determined until time of order.
    3. Do we allow shipments to Canada? No
       
       
11. Is Freight always included in the price (disable freight option)? Yes
    
    
12. Lead Time Days:
    1. Domestic: 30 days
    2. Import: n/a
    3. Registered Printed: n/a
       
       
13. Should an Import result be shown? No
    
    
14. Overrun Percentage:
    +/- 10%
15. Construction:
    1. Bottom Seal or Side Weld: Bottom Seal Always
       
       
16. Image to display in Specifications area: Same as stock
    https://www.laddawn.com/content/images/productimages/static-lf-blkcond-4mil.png  & https://www.laddawn.com/content/images/productimages/d-layflat.png 
    1. We may want to save a copy of the first file with a more generic title and use that for image so that the link does not specify a gauge.
17. Additional abbreviated text in internal item description? (ie, TAMPER EVIDENT, VAC POUCH)
    Black Conductive
18. Advanced Search Keywords (for quick search entry at top of widget):
    1. Keywords: lf, poly, bags, cs, anti, black, cond, comp, elec, carb,
    2. Type of Search: When user types any of keywords above, selection of "Black Conductive Bags" from search box drop down will execute a widget search for all stock; likewise, if user selects "Static Control>Black Conductive" from the category menu, and clicks "Find" with no dimensions or incomplete dimensions, we will return all matching stock items.
19. YMAC instructions:
    
    1. Show closest stock size in Black Conductive
    2. Show second closest stock size in Black Conductive
    3. Show closest stock size in Static Shielding
    4. Show closest stock size in Pink Anti-Static
20. Special Instructions:

None

II. User interface changes

None known of at this time. 

III. QA requirements

Test pricing, MOQ, count,price breaks, etc. for custom searches be sure they conform to pricing model.

Test stock searches - from search bar, and from widget with complete and incomplete dimensions. Be sure stock is still being returned. Test keywords noted above.

Test expanded results for description, specifications (drawing/photo included?) and samples (not included whent they should not be and included when they should be).

Other? 

IV. Change managment and rollout planning

Marketing information 

Creative brief?

Internal training and preparation? 

Coordinated with marketing campaign?